組件返修臺

外形尺寸：2300＊1260＊900
設備特點：
1. 溫度控制方式:進口溫度控制器,智能型PID溫度控制,精度高,穩定可靠,并可根據作業環境調整工作參數。
2. 溫控精度: ±1℃
3. 安全裝置: 設置溫度安全系統, 溫度失控或超過設定范圍,安全系統發出聲光報警,同時停止加熱。
4．系統設置: 加熱系統獨立作業, 在關閉加熱系統后仍可以觀測到加熱平臺的溫度。
5．保護裝置: 設置非金屬邊框,對加熱板進行隔離,避免電池板在修復過程中玻璃劃傷或破碎。
6. 設置緊急按鈕,緊急情況可迅速處理并強制切斷整機電源。
7. 以電加熱形式進行加熱，通過電熱管傳導熱量，熱量散失量小，通過對加熱板進行溫度、 隔熱、絕緣處理后有效提高轉換效率。
8. 通過溫度控制器調節溫度的上限值和下限值，可使工作臺在合適的溫度范圍內進行工作
Dimension: 2300*1260*900
Technical characteristics:
1. Temperature control mode: Inlet temperature controller, intelligent PID temperature control, stable and reliable, and be capable to adjust operating parameters based on operation environment.
2. Temperature control accuracy:  ±1℃
3. Safety device: set up temperature safety system, safety system shall give out sound-light alarm and meanwhile stop heating once temperature is out of control or exceeds setting range.
4. System settings: Heating system works independently, and it is able to observe temperature of heating platform after heating system is shutdown.
5. Protective device: provided with non-metal trim to isolate from heating board and avoid scratching or breaking by glass during repairing of battery board.
6. Alarm system setting: it will cut off electricity when emergency appears.
7. Electrical heating system: applied with elector-heating tube to reduce heat loss and after dealing with temperature, heat protection and insulation to heating board, the efficiency will be higher.
8. Temperature control: adjust the upper limit and lower limit to make machine work under suitable temperature